Spray ball nozzle

Spray ball nozzle DEFAULT

Sanitary considerations in production of food and beverage products are of critical importance. Plants must meet hygienic engineering and food safety standards to avoid product’s degradation and contamination, which can occur during processing operations due to insufficient cleaning of processing equipment which are exposed to product, and therefore plant cleaning must be carried out quickly and thoroughly. Cleaning requirements are best met with Clean-in-Place (CIP) systems, which is very well established technique used in various bio-pharma and food industries.

Basically, CIP refers to all those mechanical and chemical systems that are necessary to prepare equipment or pipeline circuits for food processing, either after a processing run that has produced fouling or when switching a processing line from one recipe to another. CIP is done without dismantling or opening the system, leading to less production downtime. On a daily basis, huge numbers of small and large vessels need to be cleaned in an economical, efficient and reproducible manner. To achieve this, spray balls play an integral role as a component of overall CIP System to assure product safety.

CIP of pipelines is relatively easier and yield more efficiency due to the turbulence caused in pipeline during cleaning but for tanks or vessels of high capacity or large build, simply pumping of detergents or liquid are not of much help as corners remains uncleaned. Spray balls are the cleaning nozzles used for efficient cleaning of tanks, vessels and other containers of various shapes and sizes where cleaning solution cannot be reached. Water when confined its flow through small nozzles is pressurized and cleans surfaces effectively. Because of its sanitary design it is widely used in breweries, dairies and other food industries as well as in pharmaceutical and chemical applications where manual cleaning is not possible to avoid human caused error in cleaning and to reduce the downtime of the process.

Working Principle

Spray balls have numerous small holes, perforated partially or completely on its surface. It facilitates the efficient cleaning of process equipment by drenching the interior surfaces of the vessels with hot water and cleaning solutions at various velocities, thus making them suitable for CIP. Spray balls offer basic rinsing of the tank’s internal surface where each hole acts as a divergent spray which have whirling effect for removing soil in a turbulent way. Spray balls ensure that the process of cleaning is highly effective and it can be designed and automated to allow for maximum coverage. Several factors are need to be considered during cleaning process like coverage of the spray balls.

Types of Spay Balls

Based on the mode of operation spray balls may be static or rotary types:

  1. Static Spray Ball: This particular spray ball is a permanent static mount, designed to direct multiple high-velocity jets against the tank wall which do not require more fluid. They are used primarily for rinsing tanks. They are inexpensive to purchase and are very robust.
  2. Rotary Spray Ball: The cleaning fluid drives the spray head by means of specially positioned nozzles. The rapidly repeated impacts remove the soil and rinses it from tank surfaces. This results in optimum cleaning efficiency at low pressure in small to large sized tanks.

Construction of Spray Balls

A spray ball consists of three parts

  1. Hollow sphere which is partially or completely covered with tiny holes perforated inside it.
  2. A long or small connecting rod for its attachment to pipe fittings of containment for supplying liquid and chemicals
  3. Bearing which may be present or absent depending on its operation

Material for construction is selected in such a way that it offers high resistance against cleaning chemicals and temperature variations. Therefore, spray ball used in food industries are mostly made up of SS 316L/304L, PTFE, PVDF which can be personalized according to process specifications. Moreover, material chosen must be food grade and comply with the requirements of regulatory bodies.

Features for Selection

  1. Extent of Cleaning: The nature of substance to be cleaned from tank should be considered like, solubility, viscosity, nature of powder / pigment material.
  2. Pump and Pipes: The pipe size used depends mainly on the required flow rate and should be chosen so that the pressure losses in the pipe system are as low as possible. It must be guaranteed that required static operating pressure is available directly at the nozzle. The pump power must be matched to this.
  3. Arrangement: The nozzles must be positioned in the upper part of the tank where possible. In addition, it must be ensured that sufficient cleaning fluid strikes the tank top.
  4. Filling Level: If possible, the nozzle should not come into contact with the product during production. The nozzle should be positioned above the maximum product level in the tank.
  5. Tank Drainage Rate: The tank drainage rate is to be selected to prevent the level of liquid from rising during the cleaning process. Make sure the drain can handle whatever volume you put into tank.
  6. Elimination of Shadowing Effect: Obstructions in the vessel such as agitators or baffles can cause “shadowing” of areas where spray cannot reach which greatly reduces the cleaning efficacy of a single spray ball. In these cases, two or more nozzles may be required to effectively clean the entire vessel.

  1. Drill Pattern: Spray ball drill patterns depend on a spray ball’s placement, surface area coverage requirements, and obstructions. Standard spray ball patterns ranges from 90 to 360-degree coverage.
  2. Ball Diameter: Ball diameters typically range from 1.25″ to 4″.
  3. Connection Size: Connection size may range from 0.5″ to 2.5″, which determines the maximum flow delivered through a spray ball with acceptable pressure drops.
  4. Connection Style. A slip collar is a standard connection. Other connection styles include butt weld, flare (no connection), tri-clamp, half coupling, and pipe nipple.
  5. Flow: A minimum flow rate of three gallon per minutes for every foot of tank circumference is required to provide enough flow for cleaning coverage. Increase in flow rate by using larger nozzle increases the impact assuming that other parameters remain same.
  6. Pressure: 25 psi is the standard design flow rate if not specified by the user with maximum pressure for custom spray balls being 70 psi. With rotating nozzles, the supply pressure normally influences the rotation speed. Higher the rotation speed, greater is the tendency of rotating nozzles to atomize the fluid into much smaller droplets.

Spray ball must have provision of drain hole to guarantee the complete drainage of the cleaning/rinsing solution. Its absence may lead to creation of dead spaces which may lead to corrosion (rogue) of stainless steel. Surfaces of spray ball must be grounded or electropolished for lowering the surface roughness (0.8 Ra) in order to meet hygienic requirement. Spray ball may be thin walled and thick walled based on the thickness of the hollow sphere. But thin walled spray balls cannot withstand high pressure of flow stream. This disadvantage can be overcome by using thick walled spray ball which is designed to withstand high impact and in this each hole acts as a very efficient cleaning jet.

Good vendors of Spray Balls include Tetrapak, GEA, Alfa Laval, etc.

Sours: https://www.pmg.engineering/spray-ball/?utm_source=rss&utm_medium=rss&utm_campaign=spray-ball

About Pipe Size and Spray Nozzles

More

Rotating Tank-Washing Nozzles

3/8 NPT 316
Stainless Steel
and Alloy X Nickel

3/4 NPT 316
Stainless
Steel

PTFE Plastic

PTFE Plastic

Multiple Stream

Spray Angle

Spray Angle

Spray Angle

These nozzles produce a concentrated stream for more effective cleaning than stationary nozzles. A fast flow rate and long spray distance makes them good for washing tanks and large vessels.

316stainlesssteel nozzles have good resistance to chemicals and corrosion.FDAcompliant nozzles are approved for direct contact with food.

PTFE nozzles have excellent resistance to chemicals and corrosion. Nozzles withalloyXnickelO-rings handle temperatures up to 250° F.

AlloyXnickel nozzles have excellent resistance to chemicals and corrosion. They can handle higher temperatures than all-PTFE nozzles.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

Flow Rate, gpm

@ 20
psi
@ 40
psi
@ 60
psi
Max.
Tank
Dia.,ft.
Orifice
Dia.
Overall
Wd.
Lg.Max.
Pressure,
psi
Max.
Temp.,
°F
Spray
Angle
Specifications
Met
Features Each

316 Stainless Steel

3/8 NPT Female

79.912.260.03"15/16"2 5/16"60250°180°____000000000000000
8.612.114.860.04"15/16"2 5/16"60250°360°____00000000000000
3/4NPT Female
click to learn more about 3/4 NPT Female
11151860.13"2 1/4"4 1/16"60250°360°FDA Compliant 21 CFR 177.1520
click to learn more about FDA Compliant 21 CFR 177.1520
__00000000000000
11151960.14"2 1/4"4 1/16"60250°270°FDA Compliant 21 CFR 177.1520
click to learn more about FDA Compliant 21 CFR 177.1520
__000000000000
13182270.19"2 1/4"4 1/16"60250°270°FDA Compliant 21 CFR 177.1520
click to learn more about FDA Compliant 21 CFR 177.1520
__00000000000000
16222770.14"2 1/4"4 1/16"60250°360°FDA Compliant 21 CFR 177.1520
click to learn more about FDA Compliant 21 CFR 177.1520
__00000000000000
21303790.19"2 1/4"4 1/16"60250°360°FDA Compliant 21 CFR 177.1520
click to learn more about FDA Compliant 21 CFR 177.1520
__00000000000000
21303790.22"2 1/4"4 1/16"60250°270°FDA Compliant 21 CFR 177.1520
click to learn more about FDA Compliant 21 CFR 177.1520
__00000000000000
324555100.28"2 1/4"4 1/16"60250°360°FDA Compliant 21 CFR 177.1520
click to learn more about FDA Compliant 21 CFR 177.1520
__000000000000

PTFE Plastic

3/4 NPT Male

19263280.06"1 1/2"3 5/8"60250°360°__Alloy X Nickel O-Rings0000000000000
22313880.06"2"3 1/2"60250°360°__Alloy X Nickel O-Rings0000000000000
3/4NPT Female
click to learn more about 3/4 NPT Female
13182280.07"2"3"60200°360°____0000000000000
15212680.09"2"3"60200°270°____0000000000000
16212680.08"2"3"60200°180°____0000000000000
22313880.14"2"3"60200°360°____0000000000000
32455590.13"2"3"60200°180°____0000000000000
32455590.13"2"3"60200°270°____0000000000000
32455590.18"2"3"60200°360°____0000000000000
1 NPTFemale
click to learn more about 1 NPT Female
334757100.15"3"4"60200°360°____0000000000000
497085100.21"3"4"60200°360°____0000000000000
497085100.23"3"4"60200°270°____0000000000000
497085100.28"3"4"60200°180°____0000000000000

Alloy X Nickel

3/8 NPT Female

79.912.260.03"15/16"2 5/16"60250°180°____000000000000000
8.612.114.860.04"15/16"2 5/16"60250°360°____000000000000000

Stationary Tank-Washing Nozzles

Often used in sanitary environments, these nozzles are clog-resistant and have no moving parts to maintain.They're easy to mount and inspect. A fast flow rate and long spray distance makes them good for washing tanks and large vessels.

Brass nozzles have good corrosion resistance.

303stainlesssteel nozzles are more chemical,corrosion, and abrasion resistant than brass nozzles.

316stainlesssteel nozzles have excellent chemical and corrosion resistance.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

Brass with Threaded Connection

1/2 NPT Brass

Multiple Stream

Spray Angle

Flow Rate, gpm

@ 20
psi
@ 40
psi
@ 60
psi
Orifice
Dia.
Overall
Wd.
Lg.Max.
Pressure, psi
Max.
Temp.,°F
Spray
Angle
Max. Tank
Dia.,ft.
 Each
1/2NPT Female
click to learn more about 1/2 NPT Female
45.66.80.03"1 1/16"1 13/16"150400°240°5-1000000000000000
12.117.221.10.06"1 1/16"1 13/16"150400°240°5-100000000000000

303 Stainless Steel with Threaded Connection

1/2 NPT 303 Stainless Steel

Multiple Stream

Spray Angle

Flow Rate, gpm

@ 20
psi
@ 40
psi
@ 60
psi
Max. Tank
Dia.,ft.
Orifice
Dia.
Overall
Wd.
Lg.Max.
Pressure, psi
Max.
Temp.,°F
Spray
Angle
 Each
1/2NPT Female
click to learn more about 1/2 NPT Female
45.66.85-100.03"1 1/16"1 13/16"150400°240°000000000000000
12.117.221.15-100.06"1 1/16"1 13/16"150400°240°00000000000000
202834270.08"1 1/16"1 13/16"60390°240°00000000000000
263745310.09"1 1/16"1 13/16"60390°240°000000000000000

316 Stainless Steel with Threaded Connection

1/8,1/2,1, and 2 NPT 316 Stainless Steel

Multiple Stream

Flow Rate, gpm

@ 20
psi
@ 30
psi
@ 40
psi
@ 60
psi
Max. Tank
Dia.,ft.
Orifice
Dia.
Overall
Wd.
Lg.Max.
Pressure, psi
Max.
Temp.,°F
Spray
Angle
 Each
1/8NPT Female
click to learn more about 1/8 NPT Female
3.444.75.770.03"13/16"1 1/2"60390°360°0000000000000000
1/2NPT Female
click to learn more about 1/2 NPT Female
39.548.455.968.4110.07"2 1/2"3 5/16"60390°360°000000000000000
1 NPTFemale
click to learn more about 1 NPT Female
57.169.980.798.8170.08"2 1/2"3 5/16"60390°360°00000000000000

2 NPT Female

147180207.9254.6180.12"3 1/2"4 7/16"60390°360°000000000000000

316 Stainless Steel with Pin Connection

316 Stainless Steel with Pin Connection

Multiple Stream

Flow Rate, gpm

@ 20
psi
@ 30
psi
@ 40
psi
@ 60
psi
Max Tank
Dia.,ft.
Orifice
Dia.
Pin
Dia.
Overall
Wd.
Lg.Max.
Pressure, psi
Max.
Temp.,
°F
Spray
Angle
 Each

3/8" ID Female

10.913.415.51970.04"1/161 1/8"1 11/16"60390°360°0000000000000000

3/4" ID Female

2226.9313880.06"1/161 1/8"1 11/16"60390°360°000000000000000

1" ID Female

57.169.980.798.8170.08"1/162 9/16"3 5/16"60390°360°000000000000000

1 1/2" ID Female

89.9110.2127.2155.8180.12"1/162 9/16"3 5/16"60390°360°000000000000000

2" ID Female

147180207.9254.6180.13"1/163 9/16"4 3/8"60390°360°000000000000000

Sanitary Stationary Tank-Washing Nozzles

Multiple Stream

Spray Angle

Certified by 3-A to meet sanitary design standards, these stationary nozzles have a 360° spray pattern to effectively rinse tanks and vessels in food,beverage, and pharmaceutical environments. Their one-piece design means there are no moving parts to maintain, making them good for clean-in-place (CIP)systems.

Made from 316L stainless steel, these nozzles will not corrode from frequent washdowns with harsh cleaners and sanitizers. All are self-draining with polished surfaces and a pin connection, which means they have no threads, to reduce the risk of bacteria growth.

These nozzles can be installed in any position. Slip them over your supply tube and secure them in place with the pin. Your supply tube must have a through-hole that matches the pin diameter.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

Flow Rate, gpm

Smoothness,
Ra

Tube
Connection
Type
Tube
ID
@ 15
psi
@ 25
psi
@ 40
psi
Max.
Tank
Dia.,ft.
Pin
Dia.
Overall
Wd.
Lg.Max.
Pressure,
psi
Max.
Temp.,
°F
Spray
Angle
InteriorExteriorSpecifications
Met
 Each

316L Stainless Steel

Female

Pin3/4"314051101/8"1 1/2"2 1/2"40400°360°32323-A Certified 78-01
click to learn more about 3-A Certified 78-01
00000000000000
Pin1"314051131/8"2"3 5/16"40400°360°32323-A Certified 78-01
click to learn more about 3-A Certified 78-01
0000000000000
Pin1 1/2"314051133/16"2 1/2"4 1/4"40400°360°32323-A Certified 78-01
click to learn more about 3-A Certified 78-01
0000000000000

Sanitary Rotating Tank-Washing Nozzles

Designed for food,pharmaceutical, and other sanitary environments, these nozzles rotate and have a 360° spray pattern to clean tanks and vessels more thoroughly and effectively than stationary nozzles.

316stainlesssteel nozzles have a dual-nozzle design, which means there are two high-impact streams of spray for removing stubborn residues, such as dried-on ingredients. They will not corrode from frequent washdowns with harsh cleaners and sanitizers. All have polished surfaces and enclosed gears, minimizing the space where bacteria can grow. Gears control the rotation speed of these nozzles. They don’t clean as fast as the PTFE nozzles, which are free-spinning, but they do allow added contact time with residues for more thorough cleaning. All of these nozzles can be installed vertically. Those with a maximum tank diameter of 30 ft. can also be installed at a 45°angle.

Often used in clean-in-place (CIP)systems,PTFE nozzles are 3-A certified to meet sanitary design standards. They’re more chemical resistant than 316 stainless steel nozzles to handle frequent washdowns with the harshest cleaners and sanitizers. They’re also self-draining and have a pin connection, which means they have no threads, to reduce the risk of bacteria growth. Water pressure controls the rotation speed of these free-spinning nozzles. They’ll clean faster than the 316 stainless steel nozzles, but not as thoroughly on tough residues. These nozzles can be installed in any position. Slip them over your supply pipe and secure them in place with the pin. Your supply pipe must have a through-hole that matches the pin diameter.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

316 Stainless Steel

316 Stainless Steel

Multiple Stream

Spray Angle

Flow Rate, gpm

Smoothness,
Ra

@ 60
psi
@ 100
psi
@ 150
psi
@ 200
psi
@ 300
psi
Max.
Tank
Dia.,ft.
Orifice
Dia.
Overall
Wd.
Lg.Max.
Pressure,
psi
Max.
Temp.,
°F
Spray
Angle
InteriorExterior Each
3/4NPT Female
click to learn more about 3/4 NPT Female
____172024300.23"2"6 1/4"300250360°32320000000000000000

1 1/2 NPT Female

27344147__500.31"3 7/16"13 1/8"200250360°3232000000000000000
637994107__500.44"3 7/16"13 1/8"200250360°3232000000000000000

PTFE Plastic with Pin Connection

PTFE Plastic

Multiple Stream

Spray Angle

Rotating Drum- and Small-Vessel Washing Nozzles

316 Stainless Steel

PVDF Plastic

Multiple Stream

Spray Angle

These nozzles produce a concentrated stream for more effective cleaning than stationary nozzles. They have a narrow diameter that makes them good for use in 55-gallon drums and vessels with small openings. They are also made of FDA listed materials for use in food applications. They have good resistance to chemicals and corrosion.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

Flow Rate, gpm

@ 20
psi
@ 40
psi
@ 60
psi
Max. Tank
Dia.,ft.
Orifice
Dia.
Overall
Wd.
Lg.Max.
Pressure, psi
Max.
Temp.,°F
Specifications MetSpray
Angle
 Each

316 Stainless Steel

3/8NPT Male
click to learn more about 3/8 NPT Male
4.66.583-50.09"13/16"2"70250°FDA Compliant 21 CFR 110.40, FDA Compliant 21 CFR 177.1556, FDA Compliant 21 CFR 211.65360°0000000000000

PVDF Plastic

1/2BSPP Female
click to learn more about 1/2 BSPP Female
4.56.37.83-50.03"1 3/16"3"70190°FDA Compliant 21 CFR 177.2510
click to learn more about FDA Compliant 21 CFR 177.2510
360°0000000000000

Stationary Drum- and Small-Vessel Washing Nozzles

Multiple Stream

Spray Angle

Often used in sanitary environments, these nozzles are clog-resistant and have no moving parts to maintain.They're easy to mount and inspect. All have a narrow diameter that makes them good for use in 55-gallon drums and vessels with small openings. Made from brass, they have good corrosion resistance.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

Flow Rate, gpm

@ 20
psi
@ 40
psi
@ 60
psi
@ 400
psi
Max. Tank
Dia.,ft.
Orifice
Dia.
Overall
Wd.
Lg.Max.
Pressure, psi
Max.
Temp.,°F
Spray
Angle
 Each

Brass

Sours: /spray-balls/
  1. Sweet trip albums
  2. Coffin dance cats
  3. Blunt tip dispensing needles
  4. Vanguard funds list
  5. Animals in love gif

Sprayballs

Copyright © 2016 - HAKE GmbH. All Rights Reserved.

Satisfaction of our customers

 is our duty and our driving force.

Based on our knowledge in manufacturing low pressure spray balls we are successful partners of our customers for more than 35 years. Expert knowledge, experience and engagement made us competent partners for our customers right from the beginning. The spray ball with the pin-symbol for all existing containers, tanks, tubs, vats, etc. from nominal diameter 8 - 50mm (0.32-1.97inch). Fixed installation of static low pressure spray balls is today’s prime technical solution for spraying disinfectants or detergent solutions.The low pressure range lies between 0,5bar (72.5lb/in2) and 10bar (1450(lb/in2). This pressure range is often found in working environments. Following conditions must be met for a flawless operation of the low pressure cleaning:1.The walls of the containers (including any fixtures inside the tank) have to be sprayed evenly with the detergent solution.  2.The flushing of the walls needs to be of a certain intensity to achieve appropriate flow conditions on the walls. 3.he spray balls guarantee a maximum of operational reliability, especially non rotating spray balls. Fixed installed spray balls have to be self cleaning, because they can be submerged in the distributed medium after the container is filled. 4.Cleaning periods should be kept as short as possible. This is achieved by employing suitable chemicals, an appropriate temperature and a corresponding type of spray ball.

Perigon spraying 360° For cleaning heavy polluted surfaces or difficult to remove dirt we recommend the spray ball type "Perigon spraying 360°". This ensures a direct hit of the detergent solution on every point of the inner surface to be cleaned. Semi-angel spraying 180° upwards In case of a low degree of pollution, spray ball type "semi-angel spraying 180° upwards" is sufficient. Cleaning of the lower half of the container is indirectly accomplished by the spillage of the detergent solution. Semi-angel spraying 180° downwards If there are any fixtures inside the tank which require special cleaning, we recommend an additional use of spray ball type "semi-angel spraying 180° downwards". It can be used above or below the fixtures.

Stationary HAKE spray balls offer the following advantages over rotating spray balls:•No moving parts, therefore no charges for maintenance and repair•Easy mounting at the connection piece by means of non-obstructing clamp which allows self-cleaning of the connection piece and convenient dismounting in case of choking.•Careful laser-processing of the drillings enables a well concentrated guidance of the water jet over a wide range without bursts or spatter.•Sensible layout of the drillings and the means of mounting make the spray-balls self-cleaning. No residue can get in the dead corner of the connection piece.•Flawless operation, even with the pump at low pressure.•Made from corrosion-proof chrome nickel steel, PTFE on request.•Tanks with complicated internal installations can be cleaned by corresponding placement of multiple spray balls.Typical application of our spray balls include many business areas, e.g. food processing and beverage as well as the chemical industry, in breweries and dairies etc. HAKE spray balls are offered worldwide by our local distributors in Switzerland, the Netherlands, New Zealand, USA and Denmark. Further local distributions are under construction.Modern technology strives for targets which can only be realised by the joined effort of the producers of machinery and the suppliers. Our close collaboration with the manufacturing industry enables us to present offers which resemble the latest state of the art. Our aim is an increase in economic efficiency and rationalization while considering the aspect of quality and expenses. In case a custom installation and special application is required, do not hesitate to ask us, the producer.

Sours: https://www.hake-gmbh.com/sprayballs.htm
TankJet® 63225 Spray Balls: Simple, Stationary Spray Balls from Spraying Systems

Tank Washing Nozzles (Static Spray Ball)

Tank Washing Nozzles (Static Spray Ball)

Rayyan Spray System provides Tank Washing Nozzles (Static Spray Ball) which helps to clean small tanks that are fit through very small openings (TW only). These Tank Washing Nozzles (Static Spray Ball) are used at high temperatures as well as for the output of steam and air.

This type of nozzle is a very compact static spray ball that produces sharp solid jets which are best for removing tiny drums.

Application

  • For Small Kegs
  • Drums
  • Barrels
  • Totes
  • Corrosion Resisting Stainless Steel
GLDHEX
1/2"452627
3/4"654028

Diagram :

Tank Washing Nozzles (Static Spray Ball)

Spray AngleFlow rate lpm at pressure P = 2 barConnection Materials
240°, 360°18 to 1081/2"3/4" BSP (F)SS-304, SS-316

Special material and connections on request.

RAYYAN SPRAY SYSTEMS
Sours: https://www.rayyanspraysystems.com/tank_washing_nozzles.html

Ball nozzle spray

The Lechler Stainless Steel Sanitary Spray Ball is a static tank cleaning nozzle specifically designed for CIP spray applications which have stringent sanitary requirements.

Click Here To Download:
•Brochure: Stainless Steel Sanitary Spray Ball Nozzle (Series 527)
The Lechler Stainless Steel Sanitary Spray Ball is a static tank cleaning nozzle specifically designed for CIP spray applications which have stringent sanitary requirements. The Sanitary Spray Ball in fact fulfills the hygienic requirements of the 3A sanitary standards. Its surface is burnished to an Ra finish of 32 for a high level of slickness. Since a sanitary nozzle can have no threads, the Sanitary Spray Ball connects to the inlet by slipping onto it and being secured by a pin. The 316L stainless steel material of construction is also FDA-compliant. Depending on the connection size, this nozzle can clean tanks from 12'-25' in diameter.

Typical sanitary tank cleaning applications:

  • Dairies
  • Pharmaceutical processing
  • Food and beverage production
  • High purity chemical processing
Click Here To Download:
•Brochure: Stainless Steel Sanitary Spray Ball Nozzle (Series 527)
Sours: https://www.pharmaceuticalonline.com/doc/stainless-steel-sanitary-spray-ball-nozzle-0001
Burst technology for more effective tank cleaning: reduce water consumption and lower costs

STATIC Spray Balls 180° | 360°

How Static Spray Balls Can Upgrade Your Work Experiences

Our static spray balls can help you achieve optimal coverage and efficiency.

Fixed spray balls have many applications for both hygienic and non-hygienic purposes. Many industries rely on static spray balls for complete coverage and easy cleaning—and at Spray Nozzle Engineering, we’re happy to assist.

Tips Regarding Static Spray Balls

Static spray balls spray a predetermined pattern based on the drilling pattern of the holes within the ball. Here are some tips for using static spray balls.

  • What a spray ball can do: Typically, spray balls are a rinsing aid. The right spray balls can help you create a cascading effect for your next big cleaning task. Our fixed spray balls could help you make cleaning faster and easier than ever.
  • No moving parts: Based on the design of these items, static spray balls have no moving parts that could malfunction.

 

Category: Tank Cleaning Spray Nozzles - BeteTags: Fixed Spray Balls, Spray Balls

Sours: https://spraynozzle.com.au/product/spray-balls/

Similar news:

Sour-tart and a little urine. I came close to her, inhaling this scent. For a second he froze, listening to the sleeping aunt, and making sure that her breathing evenly touched her lips to her open pussy.



87 88 89 90 91