Subaru crosstrek subwoofer

Subaru crosstrek subwoofer DEFAULT

Error! - Please enable Javascript

Error! - Please enable Javascript

Error! - Please enable Javascript

2021 Ascent with Navigation

The 2021 Ascent with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 Ascent with Navigation

The 2020 Ascent with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 Ascent with Navigation

The 2019 Ascent with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 Ascent with Navigation

The 2018 Ascent with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 Ascent with Navigation

The 2017 Ascent with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 Ascent with Navigation

The 2016 Ascent with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2021 BRZ with Navigation

The 2021 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 BRZ with Navigation

The 2020 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 BRZ with Navigation

The 2019 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 BRZ with Navigation

The 2018 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 BRZ with Navigation

The 2017 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 BRZ with Navigation

The 2016 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2015 BRZ with Navigation

The 2015 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2014 BRZ with Navigation

The 2014 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2013 BRZ with Navigation

The 2013 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

Invalid Model Year - Please Contact Us for more details

2021 WRX with Navigation

The 2021 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2020 WRX with Navigation

The 2020 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2019 WRX with Navigation

The 2019 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2018 WRX with Navigation

The 2018 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2017 WRX with Navigation

The 2017 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2016 WRX with Navigation

The 2016 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2015 WRX with Navigation

The 2015 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 WRX with Navigation

The 2014 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2013 WRX with Navigation

The 2013 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2012 WRX with Navigation

The 2012 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2021 Forester with Navigation

The 2021 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2020 Forester with Navigation

The 2020 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2019 Forester with Navigation

The 2019 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2018 Forester with Navigation

The 2018 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2017 Forester with Navigation

The 2017 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2016 Forester with Navigation

The 2016 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2015 Forester with Navigation

The 2015 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 Forester with Navigation

The 2014 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2013 Forester with Navigation

The 2013 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2012 Forester with Navigation

The 2012 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2021 Impreza/Crosstrek with Navigation

The 2021 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2020 Impreza/Crosstrek with Navigation

The 2020 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2019 Impreza/Crosstrek with Navigation

The 2019 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2018 Impreza/Crosstrek with Navigation

The 2018 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2017 Impreza/Crosstrek with Navigation

The 2017 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2016 Impreza/Crosstrek with Navigation

The 2016 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2015 Impreza/Crosstrek with Navigation

The 2015 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 Impreza/Crosstrek with Navigation

The 2014 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2013 Impreza/Crosstrek with Navigation

The 2013 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2012 Impreza/Crosstrek with Navigation

The 2012 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2021 Legacy/Outback with Navigation

The 2021 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 Legacy/Outback with Navigation

The 2020 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 Legacy/Outback with Navigation

The 2019 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 Legacy/Outback with Navigation

The 2018 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 Legacy/Outback with Navigation

The 2017 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 Legacy/Outback with Navigation

The 2016 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2015 Legacy/Outback with Navigation

The 2015 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 Legacy/Outback with Navigation

The 2014 Legacy/Outback with Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2013 Legacy/Outback with Navigation

The 2013 Legacy/Outback with Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2012 Legacy/Outback with Navigation

The 2012 Legacy/Outback with Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2021 BRZ without Navigation

The 2021 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2020 BRZ without Navigation

The 2020 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2019 BRZ without Navigation

The 2019 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2018 BRZ without Navigation

The 2018 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2017 BRZ without Navigation

The 2017 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2016 BRZ without Navigation

The 2016 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2015 BRZ without Navigation

The 2015 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 BRZ without Navigation

The 2014 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2013 BRZ without Navigation

The 2013 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

Invalid Model Year - Please Contact Us for more details

2021 WRX without Navigation

The 2021 WRX without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 WRX without Navigation

The 2020 WRX without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 WRX without Navigation

The 2019 WRX without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 WRX without Navigation

The 2018 WRX without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 WRX without Navigation

The 2017 WRX without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 WRX without Navigation

The 2016 WRX without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2015 WRX without Navigation

The 2015 WRX without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2014 WRX without Navigation

The 2014 WRX without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2013 WRX without Navigation

The 2013 WRX without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2012 WRX without Navigation

The 2012 WRX without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2021 Forester without Navigation

The 2021 Forester without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 Forester without Navigation

The 2020 Forester without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 Forester without Navigation

The 2019 Forester without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 Forester without Navigation

The 2018 Forester without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 Forester without Navigation

The 2017 Forester without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 Forester without Navigation

The 2016 Forester without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2015 Forester without Navigation

The 2015 Forester without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2014 Forester without Navigation

The 2014 Forester without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2013 Forester without Navigation

The 2013 Forester without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2012 Forester without Navigation

The 2012 Forester without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2021 Impreza/Crosstrek without Navigation

The 2021 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 Impreza/Crosstrek without Navigation

The 2020 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 Impreza/Crosstrek without Navigation

The 2019 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 Impreza/Crosstrek without Navigation

The 2018 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 Impreza/Crosstrek without Navigation

The 2017 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 Impreza/Crosstrek without Navigation

The 2016 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2015 Impreza/Crosstrek without Navigation

The 2015 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 Impreza/Crosstrek without Navigation

The 2014 Impreza/Crosstrek without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2013 Impreza/Crosstrek without Navigation

The 2013 Impreza/Crosstrek without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2012 Impreza/Crosstrek without Navigation

The 2012 Impreza/Crosstrek without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2021 Legacy/Outback without Navigation

The 2021 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 Legacy/Outback without Navigation

The 2020 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 Legacy/Outback without Navigation

The 2019 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 Legacy/Outback without Navigation

The 2018 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 Legacy/Outback without Navigation

The 2017 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 Legacy/Outback without Navigation

The 2016 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2015 Legacy/Outback without Navigation

The 2015 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 Legacy/Outback without Navigation

The 2014 Legacy/Outback without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses

Sours: https://www.autoharnesshouse.com/82191_info.html
Onyx Studio 3 - White - Portable Bluetooth Speaker - Hero
  • {"thumbnailImageUrl":"https://eu.harmankardon.com/dw/image/v2/AAUJ_PRD/on/demandware.static/-/Sites-masterCatalog_Harman/default/dwe244e62c/OnyxStudio3_White_Hero_dvHAMaster.jpg?sw=299&sh=299&sm=fit&sfrm=png","productUrl":"https://eu.harmankardon.com/ONYX+STUDIO+3.html?

    White
  • {"thumbnailImageUrl":"https://eu.harmankardon.com/dw/image/v2/AAUJ_PRD/on/demandware.static/-/Sites-masterCatalog_Harman/default/dw0cf5ff8c/HK_OS_GREY_HERO_x1-1606x1606px.jpg?sw=299&sh=299&sm=fit&sfrm=png","productUrl":"https://eu.harmankardon.com/ONYX+STUDIO+3.html?

    Grey

More Info

Harman Kardon Neo - Midnight Blue - Portable Bluetooth speaker - Hero
  • {"thumbnailImageUrl":"https://eu.harmankardon.com/dw/image/v2/AAUJ_PRD/on/demandware.static/-/Sites-masterCatalog_Harman/default/dwa90144cc/Harman_Kardon_Neo_Hero_Copper_1605x1605.jpg?sw=299&sh=299&sm=fit&sfrm=png","productUrl":"https://eu.harmankardon.com/NEO.html?

    Copper
  • {"thumbnailImageUrl":"https://eu.harmankardon.com/dw/image/v2/AAUJ_PRD/on/demandware.static/-/Sites-masterCatalog_Harman/default/dw67df4cf7/Harman_Kardon_Neo_Hero_Blue_1605x1605.jpg?sw=299&sh=299&sm=fit&sfrm=png","productUrl":"https://eu.harmankardon.com/NEO.html?

    Midnight Blue
  • {"thumbnailImageUrl":"https://eu.harmankardon.com/dw/image/v2/AAUJ_PRD/on/demandware.static/-/Sites-masterCatalog_Harman/default/dw34611c98/Harman_Kardon_Neo_Hero_Grey_1605x1605.jpg?sw=299&sh=299&sm=fit&sfrm=png","productUrl":"https://eu.harmankardon.com/NEO.html?

    Space Gray

More Info

We noticed that you already have products in your cart. In order to add spare parts we have to empty your current cart.

Do you wish to continue?

We noticed that you already have spare parts in your cart. In order to add new products we have to empty your current cart.

Do you wish to continue?

Sours: https://www.harmankardon.com/subaru.html
  1. 2015 gmc truck accessories
  2. Lefty fnaf jumpscare
  3. 1990 ford f150 stepside
  4. Plaza m nails
  5. Winslow, arkansas cabins

2017 Subaru Crosstrek Subwoofer Upgrade for Allentown Client

Subaru Crosstrek Subwoofer
Subaru Crosstrek Subwoofer
Subaru Crosstrek Subwoofer

We recently added a subwoofer upgrade to a repeat Allentown, PA, client’s 2017 Subaru Crosstrek for better audio performance, and we were able to craft the enclosure so there was no negative impact on cargo area access.

This client reached out to us since we had previously upgraded the vehicle’s speakers and added an amplifier under a front seat to keep it out of the way. She wanted this addition to really put the system upgrade over the top.

We handcrafted the subwoofer enclosure into the right side of the cargo area, formed it to the vehicle’s interior panels by using fiberglass, and then covered it in black automotive grade carpet to blend it to the cargo-area esthetics so it did not stand out. We designed it to fit to allow full access to the cargo area opening, and to allow her to continue using the cargo net and other features of the vehicle. We created the perfect enclosure for the Hertz 10-inch DS25 subwoofer, which appears to be factory-installed. Attention to small details like this separates us from our competition.

Contact us today or bring your vehicle by so we can guide you on the upgrades that can be done to your vehicle.

See morecontent filed under Car Audio, INSTALLATIONSor tagged with 2017, Amplifiers, Crosstrek, Hertz, Speakers, Subaru, Subwoofers

Sours: https://www.mobileedgeonline.com/2017-subaru-crosstrek-subwoofer-upgrade-for-allentown-client/
How to Install JBL Speakers on Subaru Crosstrek

OEM 2014-2017 Subaru Crosstrek 10" 100W Powered Subwoofer by Kicker H630SFJ101

$469.32Buy It Now14d 0h, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee

Seller:quirkparts✉️(847,467)98.9%, Location:Braintree, Massachusetts, Ships to: Worldwide, Item:192412874692OEM 2014-2017 Subaru Crosstrek 10" 100W Powered Subwoofer by Kicker H630SFJ101. 10" 100W Powered Subwoofer by Kicker is a direct fit for the following: 2014-2017 Subaru Crosstrek Does Not Fit Hybrid Models 2014-2016 Subaru Impreza 2.0L Hatchback Provides powerful deep bass, and also assists in clean sound reproduction from all vehicle speakers. This is achieved by its integrated 100W amplifier and a passive crossover network. The self-contained unit mounts behind the rear seat. Genuine Subaru Part Number: H630SFJ101Condition:New, Restocking Fee:No, Return shipping will be paid by:Buyer, Returns Accepted:Returns Accepted, Item must be returned within:30 Days, Refund will be given as:Money back or replacement (buyer's choice), Brand:Kicker, California Prop 65 Warning:May cause cancer and reproductive harm. See www.P65Warnings.ca.gov for more info., Certifications:OE, Country/Region of Manufacture:United States, Fitment Type:Direct Replacement, Make:Subaru, Manufacturer Part Number:H630SFJ101, Models:Crosstrek Impreza Hatchback, Modified Item:No, Non-Domestic Product:No, OE Spec or Performance/Custom:OE Spec, Part Brand:Subaru, RMS Power:100 W, Speaker Size:10", Superseded Part Number:H630SFJ100, Type:Vehicle Specific Subwoofer, UPC:Does not apply, Warranty:1 Year, Year:2014 2015 2016 2017

PicClick Insights - OEM 2014-2017 Subaru Crosstrek 10" 100W Powered Subwoofer by Kicker H630SFJ101 PicClick Exclusive

  •  Popularity - 11,315 views, 8.2 views per day, 1,386 days on eBay. Super high amount of views. 4 sold, 2 available.
  • 11,315 views, 8.2 views per day, 1,386 days on eBay. Super high amount of views. 4 sold, 2 available.

  •  Price -
  •  Seller - 847,467+ items sold. 1.1% negative feedback. Top-Rated Seller! Ships on time with tracking, 0 problems with past sales.
  • 847,467+ items sold. 1.1% negative feedback. Top-Rated Seller! Ships on time with tracking, 0 problems with past sales.

    Recent Feedback

People Also Loved PicClick Exclusive

Sours: https://picclick.com/OEM-2014-2017-Subaru-Crosstrek-10-100W-Powered-Subwoofer-192412874692.html

Subwoofer subaru crosstrek

Genuine Subaru Crosstrek Powered Subwoofer

Select your vehicle for the best product fit

Select by Model Change Vehicle

-- Select Model --

-- Select Year --

3 Geniune Subaru Crosstrek Powered Subwoofers found

  • Subaru Crosstrek Powered Subwoofer - H630SFJ101
    2015-2017 Subaru Crosstrek 10" Powered Subwoofer 5Dr

    Part Number: H630SFJ101

    Other Name: KICKER Powered SubwooferReplaces: H630SFJ100

    Your Price: $430.49

    Retail Price: $499.99

    You Save: $69.50

    More Info

    Fits the following Subaru Models

    • 2015-2017 Subaru Crosstrek
    • Provides powerful deep bass, and also assists in clean sound reproduction from all vehicle speakers. This is achieved by its integrated 100W amplifier and a passive crossover network. The self-contained unit mounts behind the rear seat. Manufactured for Subaru of America by Kicker®.
    Less Info
  • Subaru Crosstrek Powered Subwoofer - H630SFJ000
    2013-2014 Subaru Crosstrek Subwoofer Kit (Non-Navi)

    Part Number: H630SFJ000

    Other Name: Subwoofer 5 Dr Non NAVI

    Your Price: $344.39

    Retail Price: $399.99

    You Save: $55.60

    More Info

    Fits the following Subaru Models

    • 2013-2014 Subaru Crosstrek
    • May not be used in conjunction with the Rear Seat Back Protector or cargo nets. Not Applicable to the Hybrid Model
    • SUBWOOFER 5 DR NON NAVI
    Less Info
  • Subaru Crosstrek Powered Subwoofer - H630SFJ100
    2013-2014 Subaru Crosstrek 10" Powered Subwoofer 5d w/ Navigation

    Part Number: H630SFJ100

    Other Name: Subwoofer 5 Dr NAVIReplaced by: H630SFJ101

    Your Price: $430.49

    Retail Price: $499.99

    You Save: $69.50

    More Info

    Fits the following Subaru Models

    • 2013-2014 Subaru Crosstrek
    • Provides powerful deep bass, and also assists in clean sound reproduction from all vehicle speakers. This is achieved by its integrated 100W amplifier and a passive crossover network. The self-contained unit mounts in the trunk of 4-door models and behind the rear seat in 5-door models. Manufactured for Subaru of America by Kicker®. May not be installed in conjunction with 4-door Rear Cargo Trays or 5-door Rear Seat Back Protectors, Rear Seat Back Cargo Nets or Side Cargo Nets.
    • SUBWOOFER 5 DR NAVI
    Less Info
Sours: https://www.subarupartsdeal.com/accessories/subaru-crosstrek-powered_subwoofer.html
How to Install JBL Speakers on Subaru Crosstrek

Subaru Crosstrek Gets an Audio Upgrade Without Losing Space


WHY? 

This customer came to us with his 2019 Subaru Crosstrek wanting to improve the audio in his vehicle, without sacrificing ANY space.  His Subaru came with the standard factory audio system, which leaves a lot to be desired.

During the free ono-on-one consultation, we were able to recommend different options, including options that take up space.  Sometimes a customer’s idea of a subwoofer is a giant box in the cargo area; however, we have ways of adding clean low-end bass without sacrificing much space at all.  Ultimately, we want to deliver the best sound possible, but within the client’s parameters, and that’s exactly what we did on this project.


WHAT?

Sound dampened the front doors – For phase 1 on this build, we are powering the factory speakers, but we still wanted to ensure that the front door woofers had a solid surface to play on.  This simple upgrade will improve the mid-bass in the front doors, reduce rattles and vibrations in the front doors, as well as set up the customer for a future speaker upgrade.  As an added benefit, the Sound Shield will also help reduce road noise inside the vehicle.

Added an amplifier with integrated DSP – The customer cared more about quality and clarity than he did about loud volume and heavy bass.  We decided the best route to improve his audio experience was to add an amplifier with an integrated DSP (Digital Signal Processor) to power his existing factory speakers, as well as a new subwoofer we will be adding.

You may be asking yourself, “who in their right mind would add an amplifier with a DSP to factory speakers?”  Ultimately it comes down to where is the customer’s budget going to be best spent to give them the best upgrade possible.  We know definitively that adding an amplifier and DSP to factory speakers will sound better than simply just upgrading speakers.  Obviously, the factory speakers need to be in good working condition, but by approaching the build this way, we’re able to give the customer the biggest leap in sound in phase 1 while also setting them up for easier future upgrade.

We are running front and rear speakers from the new JL Audio VXi amplifier, as well as the under-seat subwoofer.  The layout is detailed below:

Channel Layout

1 and 2 – Front factory speakers

3 and 4 – Rear factory speakers

5 – Under-seat BLAM subwoofer

Add an under-seat passive subwoofer–

The main objective of this project was to upgrade the audio in the vehicle without sacrificing any cargo space in the vehicle.  A Subaru Crosstrek is a versatile vehicle, and in this scenario the customer really valued the utility that this vehicle offers.

We decided the MSP 25 passive subwoofer from Bonneville Labs would be a perfect solution to fit under the front passenger seat and fill-in the low-end bass in the system.  The MSP 25 can handle 125 watts of RMS power, and it can play down to 50 Hz.  Again, the goal was not window-shaking bass in the build, we were using the under-seat sub to fill-in the low-end bass and alleviate the door woofers from having to play too low.


HOW?

Elevated Audio is known first and foremost for our customer’s overall experience from beginning to end. Winning the North American 2018-2019 Customer Choice Award in the 12-volt industry-validated our commitment to provide trusted interactions between our store in Denver and our customers.

Here’s how we performed the installation.

WIRING

The signal was found at the factory radio. We did not replace the radio in this vehicle because it does not make any sense to do so! It already has all functionality an aftermarket unit would have. The radio is where we soldered in our connections for the signal to the amplifier.

Power is supplied to the amplifiers utilizing our four gauge pure copper wiring. Never use copper clad aluminum (CCA) if you want the best current flow!

MOUNTING AMPLIFIERS

At Elevated Audio, we build amplifier plates that mount to factory bolts on the chassis, and we attach our amplifiers to those plates. This is to eliminate the need for running drywall screws through the floor of your brand-new vehicle. We mounted the JL Audio VX700/5i under the front driver seat and it fit like a glove!

All wiring is wrapped in Tesa tape for a factory look and feel. The wiring routes in factory channels throughout the vehicle and is not merely “tucked” under panels, which always find a way to wiggle out after a few months. It’s our goal to make it hard to differentiate factory wiring from aftermarket.

CALIBRATING THE AMPLIFIERS

Amplifiers are useless unless set up correctly. Elevated Audio always sets the gains of our amplifiers by using an oscilloscope. This tool allows us to read the clipping point and set the amplifier to play up to that point but never beyond it, protecting the entire system and your ears!

We also use the oscilloscope to determine the max safe volume from the factory head unit.  Most factory head units do not output a clean signal all the way to the top of the volume scale, so it is very important to determine the clipping point of the factory signal to ensure we are not sending distortion into the system from the source.

DSP TUNING

Since the 5 Channel is a DSP amplifier and allows us to modify the whole audio experience, we set a microphone in the vehicle to capture the pre-tuned sound. We use this data to offset any peaks and valleys in the acoustic response to meet a particular response curve that our ears love. This creates music that sounds like the artist intended it to sound.

Another powerful tool in the DSP is the ability to time the sound. We measure the distance from each speaker to determine the firing order of the speakers. This process allows them to all hit your ears at the same exact time.

This process, along with level matching, allows a stage and image to be created on top of your dash, and this is just what we did in this Crosstrek. Now our customer can hear and imagine the artist and their band playing on top of his dash.

LEVEL CONTROLLER

The DRC-205 controller is flush-mounted into the center console area for easy access. The lights on this knob are programmable, which means the customer can choose their favorite color of illumination.  The level controller acts as a “dimmer-switch” for your bass and allows you to incrementally adjust the subwoofer bass independently.

UNDER-SEAT PASSIVE SUBWOOFER

We were able to mount the MSP 25 passive subwoofer under the front passenger seat without the seat scraping or dragging on the subwoofer.  We fabricated an ABS plastic mounting plate that was secured to the vehicle using stainless steel machined hardware.  We then mounted the BLAM subwoofer to the ABS plate.  This allows the subwoofer to be easily serviceable without affecting the integrity of the vehicle.  This also allows the entire system to be easily removed from when the customer decides to sell or trade-in the vehicle.

SOUND DEADENING

While you’re performing any upgrade to your sound, it is crucial to slow down the transfer of energy throughout the door panel and to cut down the external road noise. At Elevated Audio, we use Sound Shield premium sound deadening to achieve both results.  We applied full coverage to both of the front doors in this Crosstrek. (the photo shown below is only half coverage, it was taken during the sound treatment install)


THE RESULT!

We strive for a great experience in-house and after the sale. We are happy to know there is one more person on the road enjoying their morning commute!

Overall, this is a simple build that is not destructive to the vehicle in any way, and best of all, we did not take of any space in the vehicle with the audio upgrades!  This whole system may be removed and reinstalled into our customer’s next vehicle ten years down the road.

Please contact us for your own Subaru system design consultation, because while this is a great setup, it may not be what you need. We tailor each build to our customer’s needs and expectations, so we must build something special just for you.

Music. It’s What Moves Us.

-Elevated Audio

 

Sours: https://elevatedaudioinc.com/2020/05/22/subaru-crosstrek-gets-an-audio-upgrade-without-losing-space/

Similar news:

He completely submitted to his charming mentor and only shamelessly pawed her in all accessible places. And everything was available, and Olezhka was completely stunned by the happiness that fell on him. Throwing her hands behind her head, Nika lay royally in the center of this unusual bed, and with a smile accepted. His awkward caresses and passionate kisses.

A couple of times he got caught up for trying to suck her beautiful neck, like a young Dracula, and moved on to more innocent kisses, but more daring.



50 51 52 53 54