J35 turbo manifold

J35 turbo manifold DEFAULT

2007 Acura TL Type-S: Schmuck-Built Turbo TL

He's owned JDM icons and Kei cars, but it's Shayne Wilson's turbo mom-mobile—done in part by Jason Schmuck—that's got us gawking

More Awesome Acuras
Super-Clean Integra Type-R
JDM Honda Accord Tourer (TSX Wagon)

Some of our favorite conversations are prompted by the question: which cars have you owned? (Or similarly, which cars have you driven?) Real passions get exposed and reflected on endlessly in that dialogue, but beyond the collectors and ultra-rich who can bankroll such a life, we've come to appreciate a lot of the wildly varied low-key finds and smaller compilations amassed by equally real enthusiasts, like Shayne Wilson. In addition to his 9-to-5 in sales for a local Honda dealership in the Baltimore, Md. area, Shayne also dabbles in buying and selling JDM imports, which has led to a rotating stable of several truly unique machines.

Right now, Wilson owns a 1992 Suzuki Cappuccino roadster Kei car and has a 1995 Toyota Celsior on the way from Japan. In the last two years, he's also owned a Mazda Autozam AZ-1, Mitsubishi Pajero, Honda Legend, Toyota Mark II Tourer V, Honda ACTY, Honda Street, Honda Beats, and an R32 Nissan Skyline, as well as others. Additionally, he's restoring a 1973 Cadillac Eldorado Fleetwood convertible that was passed down from his grandfather.

"I'm a lover of all cars and appreciate anything with an engine and wheels on it," Shayne tells us. "It's a side hobby, and unfortunately I can't keep all of them, so I tend to change out the cars every three to five months."

Shayne's got two other cars, a Lexus GX 470 SUV that he dailies and uses to haul around this—his 2007 Acura TL Type S. Up until this model year, the S trim had been missing from the TL lineup since 2002 from the previous generation of the sedan, but with its reintroduction in '07 it got more power from its 3.5L V6, LSD with the 6-speed manual option, Brembo brakes, and a raft of other go-fast goodies. And Wilson ended up at the TL Type S in May of 2012 after a deer strike totaled the Accord Coupe V6 6-speed he was driving (yikes!)

"It started as a daily driver replacement after the Accord, because the TL-S was always my attainable dream car. About six months later I got a Civic Si as my daily and shared daily driving between the two. As I started adding more parts, it became more of a weekend/1-to-2 days a week car. Now that the car is in its current form, it unfortunately isn't driven like it used to be, but I take it out to shows and local meets."

In some ways, you can view the build up of the TL as having two arcs, pre-turbo and post-turbo. Pre-turbo was heavily about establishing a deliberate look to the four-door, an aesthetic that included some JDM touches and a lot of custom work—because, well, it's a TL (Google the aftermarket for the sedan, we'll wait; it shouldn't take you long). The S gets low with Tein Street Advance coilovers and is outfitted in a raft of stiff stuff—beefy Progress front and rear stabilizer bars, RV-6 Performance front strut tower bracing, compliance bushings, et al—to manage handling. The big sedan now floats on Toyo R888R-shod 18-inch Rays Gram Lights 57Xtreme wheels in lightweight SP-spec, Shayne waiting over a year before Rays produced the specialty rims.

Within the cabin the front row of seats are now Recaro SR3 TopGuns in original all-black leather with the black confetti center inserts, and you'll also find a Mugen Momo steering wheel and AEM gauges staring back at the driver. Outside, the Moroccan Red Pearl sedan (a super rare color for this gen. TL-S) is canvas for a tasteful blend of body bits that includes Gerzy Bear carbon-fiber front bumper cover, Carbon Creations carbon hood, EndlessRPM carbon grille and trunk, HIC USA rear roof spoiler, and an ASpec rear lip. The tail tights might be the most curious talking point of the exterior, though; apparently, they are one set of only 40 in the US. As the story goes, the lights were originally bound for the Chinese domestic market but were mistakenly sent to the States, and Shayne jumped on the opportunity to incorporate them into his Acura.

The build's next turning points happened after Shayne basically maxed out what he was going to get from engine naturally aspirated with bolt-ons. He might be better suited to explain this one: "One late night my buddies and I were drinking some Jack Daniels and I saw a used J&R turbo kit for sale. It was a rare item because they only made about 10 sets before going out of business, so with this one coming up on the used market, I had to have it. After a few of my buddies', 'No balls, you won't do it' comments, I sent over a deposit on PayPal and purchased the turbo kit. It then sat for two years while I added more parts to go with the turbo build, such as tuning, methanol injection, gauges, etc."

We always love it when our friends push us to burn through money, but as the saying goes, things escalated quickly. After 18 months on the first turbo setup, Shayne decided he wanted still more power, but also wanted to improve on the look of the engine bay; that's when he decided to take his car to Jason Schmuck from Schmuck Built after seeing his welds and his sick J-swapped S2000 that we featured in 2018.

All the custom fab work you see in the engine compartment is Jason's. He weaved together the entirety of the Vibrant Performance charge plumbing and intercooler for the BorgWarner S369SXE turbo-based system, in addition to the fully custom exhaust and engine cooling apparatuses (he even did the one-off cooling setup for the power steering fluid), primarily with Vibrant (even the heat exchangers). To keep up with the turbo, Shayne upgraded fueling with a Deatschwerks DW400 pump, Injector Dynamics ID1000 injectors, and Aeromotive FPR, but we thought the one thing that stood out under the hood more than anything else (even the turbo) was the P2R Holley EFI intake manifold swap—did not see that coming.

The car is meant to be driven—launched hard and wrung out—and to that end Shayne saw need to throw some love at the transmission. The gearbox has been rebuilt with MFactory billet straight-cut third and fourth gears, a P2R sixth-gear cuff for some bolstering, and custom billet synchro rings. Power is transferred out the J35A8 V6 via Clutch Masters FX400 clutch, and eventually makes its way to 1,000hp-rated Insane Shafts axles up front.

After spending a year at Schmuck Built, the Type S then went to Derek Robinson at Innovative Motorworks for the final fuel system improvements and tuning of the Hondata FlashPro engine management. Derek was able to extract 450whp and 420 lb.-ft. of torque from the front hubs on a Dynapack at just 8psi of boost pressure. Shayne says they turned up the wick but just never got around to getting back on the dyno to see how much more they could make.

Which is fine—the engine internals are pretty much factory, and for sure would've started stressing under the added load, but not for long. Shayne already has a full J35 build in the works, culling parts for the next level of this project car—but admittedly he's in no rush. The car has been gone for so long getting created, he's just happy to drive it for now; once he does eventually get around to finishing the next phase, he's got his eye on 1/2-mile top-speed events. But like we said, there's no urgency, and with someone like Shayne—someone who clearly enjoys the road less traveled—it's probably more important the savor the journey than crush the destination.

Tuning Menu
Owner:Shayne Wilson
Hometown:Baltimore, Md.
Occupation:Sales
Engine:Custom metal fabrication by Jason Schmuck/Schmuck Built; BorgWarner S369SXE turbocharger with 1.10 AR with heat treatment coating; P2R Holley EFI intake manifold swap and billet fuel rails; custom Schmuck Built Vibrant Performance charge plumbing, turbo/exhaust headers, 3.5-in. stainless cat-back exhaust with mufflers, radiator, hoses, coolant reservoir, power steering fluid cooler, oil cooler, and catch can/power steering fluid reservoir combo; QTP electric exhaust cutout; Deatschwerks DW400 fuel pump; Injector Dynamics ID1000 fuel injectors; Aeromotive fuel pressure regulator; -8AN feed lines with fuel return system
Drivetrain:Clutch Masters FX400 clutch; MFactory billet straight cut 3rd and 4th gears; P2R 6th gear cuff and clutch lines; custom billet synchro rings; Redline DOT 5 fluid; Insane Shafts 1,000hp axles; K-Tuned shifter and bushings
Engine ManagementHondata FlashPro tuned by Derek Robinson at Innovative Motorworks
Power:450 WHP, 420 lb.-ft. of torque
Footwork & Chassis:Tein Street Advance coilover suspension; Progress front and rear anti-sway bars; upgraded control arms; adjustable camber kit; all metal compliance bushings; RV-6 Performance front strut bar
Brakes:RB Performance slotted rotors and pads; Brembo front calipers; Heeltoe stainless lines; Redline DOT 5 fluid
Wheels & Tires:Rays Gram Lights 57Xtreme SP 18x9.5-in. +22; Toyo Tires R888R 265/40 18
Exterior:Black painted roof; Gerzy Bear carbon-fiber bumper; Carbon Creations carbon-fiber hood; EndlessRPM carbon-fiber grille and trunk; HIC USA rear roof spoiler; ASpec rear lip; MDX jewel-eye headlight retrofit; Chinese Domestic Market taillights
Interior:Recaro SR3 TopGun seats, original all-black leather with the black confetti center inserts, logo front and back in gold; Corbeau harnesses; Mugen Momo steering wheel; all AEM gauges including oil pressure, wideband AFR, and AEM Tru Boost Controller
MotorTrend LogoTHE LATEST IN CAR NEWS

EMAIL NEWSLETTER SIGN-UP!

Share on FacebookShare on Twitter

Sours: https://www.motortrend.com/features/turbo-2007-acura-tl-type-s/

Honda Civic EG with a turbo 3.5 L J35 V6 04

Andre Simon from High Performance Academy talked with Aaron O’Neal from English Racing about his powerful Honda Civic EG which achieved 199.38 mph in the 1/2 mile earlier this year. The engine is a 3.5 L J35 V6 with J32A2 heads, stock crank, Crower modified camshafts, Wiseco pistons, Pauter X-beam rods, Precision 8385 turbocharger, and modified stock intake. The engine makes 1100+ horsepower and 700+ lb-ft of torque on Ignite 114 racing fuel and AEM Infinity 708 ECU. Power goes to the Mickey Thompson slicks through a Acura TL six-speed manual converted to a five-speed with a straight-cut fourth gear. Listen as Aaron explains how he makes that level of power and gets it to the ground.

Honda Civic EG with a turbo 3.5 L J35 V6 04

Honda Civic EG with a turbo 3.5 L J35 V6 04

Honda Civic EG with a turbo 3.5 L J35 V6 04

Source: High Performance Academy via Piotr

Related

Sours: https://engineswapdepot.com/?p=28785
  1. Wood elf druid art
  2. Filbert animal crossing
  3. Elo music youtube
  4. Wells fargo number

Honda Accord V6 twin turbo kit (J series motors) For Sale



Buy Now

Honda Accord V6 twin turbo kit (J series motors):
$2500.0

Hi This is a custom turbo kit that was in my SEMA/magazine show car Included: 2 Garret GT 25 turbos (one turbo is polished and has a therma tec blanket) fuel pan with steal braided hose lines to run to/from turbos Intercooler piping (polished) Deautsch werks fuel pump (with the fuel pump housing and steel steel braided return line from fuel regulater, so you can just swap out the one in your tank) Deautsch werks 600cc fuel injectors with clips AEM FIC AEM fuel regulater (not pictured) custom intake for front turbo with AEM air filter down pipe (therma tec wrap) and y pipe fittings  Yonoka motorsports FMIC Turbo XS bov Hose technics hoses Edelbrok fuel lines Mizu S2000 radiator (there is some small leak that will need to be repaird at a radiator shop, not pictured) to fit your Hondayou will need to make modification. This is a free part included Evolution racewerks piping Oil Pan (not pictured) P2R fuel rails (not pictured) Stainless steel j pipe, will need to be modified to fit turbo down pipes, currently fits stock motor. You will need a exhaust shop to assist. Comes with modifed stock j pipe thats fits turbo down pipes but will need a muffler shop to connect to your exhaust I may be forgetting some things No one makes a off the shelf twin turbo kit for the j series motor. This is quality parts. I've done 95% of the hard work. Now you just have to get it installed. Its well worth it. this turbo set up is pretty much bolt on and will come with everything you needs for install, if you live in So Cal, Evolution racewerks who built the kit can install it for you. you will need to run vacuum lines fromyour intake manifold for the boost lines, but everything else that would need to be custom done is included. I have the maps from Church Automotive. the car last put 351hp/350tq to the wheels on this set up. I know since I have had this kit allot of you are doing amazing things and can get more power.  I am NOT including the AEM boost controller or Air/Fuel gauge. I am including ALLOT of things, not just a turbo kit but fuel system as well with computer managment this kit cost me $7000-$8000 (if you piece each part and add the labor for the custom piping its very expensive) this kit came of my 2004 HondaAccord V6 6spd coupe. this should fit all j-series motors with some modification PLEASE DONT BE SHY, I dont want this collecting space, I would rather have someone else enjoy it. I will provide any extra stuff I have for you such therma tec blankets or what I can find in the garage. I strongly suggest a mechanic or someone with mechanical skills install this. Its ready to go, I would only suggest buying new seals between the headers and turbos. Fule regulator and steel lines not pictured free pick up in Atlanta or free shipping in lower states


Buy Now

Latest Reviews

Send us a Tip
Sours: http://www.egmcartech.com/parts/Honda-Accord-V6-twin-turbo-kit-J-series-motors-_321993148186.html
*Bertha Gets Dynoed* Turbo J35 Accord Puts Down Crazy Powa @ Only 8Psi !! How to Quiet Doubters...

I remember how I was mowed in the garden. And that's all. - Aha. Misha laughed again. Remember where else you come from.

Manifold j35 turbo

With the fingers of one of his feet, he stepped on Katya's face and pressed her head to the pillow. The girl wheezed heavily. The boy also groaned.

Honda J35: Everything You Need to Know

While she was packing her suitcases and then going to take out the trash, I pulled out something from the mezzanine. At some point, I caught on the edge of the cardboard, and found that something was hidden between it and the wall. I peeled back a thin sheet, and pulled out from the slot several sheets of paper, covered with a pen, torn from a notebook. At that moment, my friend returned, and I automatically shoved them into my pocket.

You will also be interested:

Not a single soul, I said, gladly shaking the warm hand and refraining from wanting to hug her around the waist. - And where is Nadia. - Is waiting for you. She's in bed. Natalya opened the door to the second room and entered there, leading me by the hand.



1745 1746 1747 1748 1749