Apn setting ipad

Apn setting ipad DEFAULT

Learn How to Change APN Settings on Your Mobile Device

The Access Point Name (APN) represents the network or carrier that your cellphone or tablet uses for internet access. Usually, you don't have to touch the APN settings because they are configured for you automatically. Sometimes, however, you may want to visit the APN settings screen on your device.

Reasons people want to change their APN settings include troubleshooting when they can't get a data connection, moving an unlocked phone to a new service provider, attempting to avoid data charges on a prepaid cellphone plan, or trying to avoid data roaming charges.

Some of the reasons to change an APN involve activities in which your cellular provider would rather you not engage, such as avoiding data charges. As a result, you can only view or edit your APN on your mobile device if the carrier allows it. If you can't access your APN, you have to contact your carrier to make any changes.

Caution Regarding APN Changes

Changing the APN can mess up your device's connectivity, so be careful when editing it. Make sure you write down the APN settings before you make any changes, just in case. If you enter nonfunctioning APN settings, you might lose the cellular and data connectivity on your phone. You may also incur additional charges.

iPhone and iPad APN Settings

If your carrier allows you to view the APN settings — and not all of them do — you can find it on your mobile iOS device in one of these two locations:

  • Settings > Cellular > Cellular Data Options > Cellular Network
  • Settings > Mobile Data > Mobile Data Network

If you can view the APN settings, change them by tapping each field and entering the information supplied by your carrier. The settings save automatically. Depending on your cellular provider, you may not be able to change the APN settings.

If your carrier does not allow you to view or change the APN on your iPhone or iPad, you might try a service or site like Unlockit on the iPhone or iPad and follow the instructions for the APN Changer. The site was developed so that you could use unofficial SIM cards from other carriers on your Apple device.

If your efforts to change the APN are unsuccessful and you didn't write down the correct APN for your provider before you made the changes, you can return the iOS device to its original settings by tapping General > Reset > Reset all Settings to get back to the default APN information. Resetting all settings on the iPhone means you'll have to re-enter your information and data. Updating the iOS version of your device may also return the APN to the original settings.

Android APN Settings

Now that unlocked smartphones are available, owners can move between carriers. When they do, a new APN must be used to identify the carrier.

Unlocked Android smartphones have APN settings, but their location varies by the phone manufacturer. In general, you can locate the APN settings on your Android device at:

  • SettingsMobile Networks > Access Point Names

If you don't find them there, look in the Wireless & networks or Network and Internet section of the settings or in Cellular Networks.

When you find the appropriate APN section, take these steps:

  1. Tap to open the Access Point Names section.
  2. Do not change any existing APNs. Instead, press the plus sign to bring up Edit access point.
  3. Enter the information from your carrier in the fields provided, leaving fields blank where you don't have any information to enter. Type everything exactly; even a stray space can throw everything off.
  4. Save the APN. If you don't see the Save option, look in the menu represented by three dots.
  5. Return to the Access Point Names screen and select the new APN.

A Guide to APN Settings

Another resource for both iOS and Android mobile devices is the APNchangeR project, where you can find cellular carrier settings or prepaid data info by country and operator.

Different APNs may represent differently priced plans with your carrier. If you want to make a change in your plan, contact your carrier instead of trying to change the APN yourself. You may end up with a higher-than-expected bill or a smartphone that won't make calls at all.

Thanks for letting us know!

Sours: https://www.lifewire.com/how-to-change-apn-settings-on-your-mobile-device-2377931

Use these steps to support network settings on an iPhone running Apple iOS 14. 

 

APN & data settings

These settings are automatically set to the correct values with the Carrier Update when a T-Mobile SIM is inserted and cannot be changed. To ensure you have the correct settings, reset your network settings.

 

Manual network selection

The device detects and registers on wireless networks inside T-Mobile’s calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

  1. From the Home screen, tap Settings > Cellular (iPhone) or Cellular Data (iPad).
  2. If you have an iPhone with an eSIM, tap the line you're making changes to.
  3. Tap Network Selection.
  4. Slide the Automatic slider to the off position to start scanning for networks.
  5. Select desired carrier.

 

Switch 2G / 4G / 5G

For iPhone 11 series or older: There is no option to switch between 2G, 3G, and 4G on iOS 14. You can only disable LTE.

For iPhone 12 series with 5G: The default settings for 5G on iPhone are optimized for battery life and data usage based on your data plan. You can customize these options for when to use 5G and how much data to use in some apps.

  1. From the Home screen, tap Settings > Cellular > Cellular Data Options.
  2. If you're using Dual SIM, go to Settings > Cellular and choose the number whose options you want to change.
  3. Tap Voice & Data and choose how your iPhone uses the 5G network, which can affect battery life.
    • 5G Auto: Enables Smart Data mode. When 5G speeds don’t provide a noticeably better experience, your iPhone automatically switches to LTE, saving battery life.
    • 5G On: Always uses 5G network when it’s available. This might reduce battery life.
    • LTE: Uses only LTE network, even when 5G is available.

 

Data Mode

Changing data modes can change the way your phone uses our data network for all of your web-based applications. By default, Allow More Data on 5G is enabled. You can choose to change these settings, but battery life may be affected. 

  1. From the Home screen, tap Settings > Cellular > Cellular Data Options.
  2. If you're using Dual SIM, go to Settings > Cellular and choose the number whose options you want to change.
  3. Choose how your iPhone uses the data, which can affect battery life.
    • Allow More Data on 5G: Enables higher data-usage features for apps and system tasks. These include higher-quality FaceTime, high-definition content on Apple TV, Apple Music songs and videos, and iOS updates over cellular. This setting also allows third-party apps to use more cellular data for enhanced experiences. 
    • Standard: Allows automatic updates and background tasks on cellular, and uses standard quality settings for video and FaceTime. This is generally the default mode.
    • Low Data Mode: Helps reduce Wi-Fi and cellular-data usage by pausing automatic updates and background tasks.

 

Turn on / off airplane mode

Airplane mode turns off wireless connections. This allows app and menu use, but prevents voice or Internet use.

  1. From any screen, access the Control Center:
    • iPhone X: Swipe down from the upper-right corner of the screen.
    • iPhone 8 and earlier: Slide your finger up from the bottom of the screen. If a small arrow appears, slide your finger up again.
  2. Tap the Airplane Mode icon.

 

Turn on / off data roaming

Follow these steps to turn off data roaming. If roaming in a Simple Global country with iOS 10, you must turn off mobile data to prevent data usage.

  1. From the Home screen, tap Settings > Cellular or Cellular Data.
  2. If you have an iPhone with an eSIM, tap the line you're making changes to.
  3. Tap Cellular Data Options.
  4. Drag the Data Roaming slider to OFF.

For iPhone 12 series with 5G: Carriers around the world are still working to deploy their 5G roaming support. If you turn on Data Roaming, you can get cellular data through 4G or LTE networks when you travel. You can also obtain a local SIM card or eSIM and use it as a single line with 5G where available.

 

Turn on / off mobile data

  1. From the Home screen, tap Settings > Cellular or Cellular Data.
  2. If you have an iPhone with an eSIM, tap the line you're making changes to.
  3. Tap Cellular Data to turn on or off.

 

Turn on / off LTE

For iPhone 11 series or older

  1. From the Home screen, tap Settings > Cellular or Cellular Data.
  2. If you have an iPhone with an eSIM, tap the line you're making changes to.
  3. Tap Cellular Data Options, then tap the Enable LTE toggle.
Sours: https://www.t-mobile.com/support/devices/apple/apple-ios-14/network-apn-and-volte-ios-14
  1. Mega neon legendary
  2. Cisco umbrella sig
  3. Born boots women
  4. Brandi williams instagram
  5. Como ver novelas online

If you are unable to browse the internet on your Apple handset when not connected to a Wi-Fi network, you may need to check your APN Settings.

Automatic Set Up
As long as you have upgraded to the latest version of iOS, the Truphone APN settings will automatically be applied through Carrier Settings updates.

Manual Set Up
For any iOS prior to iOS8, and are unable to connect to Wi-Fi to upgrade, you can manually change your APN temporarily by following these steps:

1. Select Settings Cellular or Mobile Network 

2. Select Cellular Data Network or Mobile Data then Mobile Data Options


3. Set your APN settings to:

APN: truphone.com
Username & Password : *Leave Blank*


4. You're done! Click the Home Button and all changes will be saved.

iOS APN 1 

For other Data Settings, please go to Setting Up Data On Your Handset
If you are still having issues using data after setting the APN, please go to I Have No Data Or Internet Connection

Sours: https://www.truphone.com/support/how-to-configure-your-apn-settings-apple-ios/
How to change your APN settings on an iPad with a mobile data sim from O2

View and edit your Access Point Name (APN) on your iPhone and iPad

If you enter incorrect APN settings, you might lose cellular data connectivity and receive additional charges. Don't edit the APN unless directed by your carrier or mobile device administrator. Contact your carrier to verify the correct APN settings.

If your carrier allows it, you can view your APN settings in one of the following locations:

  • Settings > Cellular > Cellular Data Options > Cellular Network
  • Settings > Mobile Data > Mobile Data Options > Mobile Data Network

If your device doesn't have either option, contact your carrier.

To change your settings, tap each field and enter the details from your carrier. The settings should save automatically. Depending on your carrier, you might not be able to change the cellular data settings. If your carrier needs a different APN setting, you might be able to use a configuration profile with the correct setting.

Unless you're using a configuration profile, updating iOS resets any changes made to your APN settings. If you edit your APN settings before updating iOS, your settings will reset to the default values. You might need to reenter your settings after an iOS update.

Sours: https://support.apple.com/en-us/HT201699

Ipad apn setting

Use these steps to support network settings on Apple iOS 10. Check the software version using Software versions & updates: Apple iOS 10.

APN & data settings

iOS 9 & 10

You are unable to edit APN settings in iOS 9 & 10. To ensure you have the correct settings, reset your network settings.

iOS 8

  1. From the main menu, tap Settings > Cellular.
  2. Check that Cellular Data is turned on.
  3. Tap Cellular Data Network.
    • If this setting does not appear on the device, the device is not unlocked. Refer customer to previous carrier.
  4. Enter the following information under the Cellular Data section:
    • APN: fast.t-mobile.com
    • Username: <leave blank>
    • Password: <leave blank>
  5. Enter the following information under the LTE Setup (Optional) section:
    • APN: <leave blank>
    • Username: <leave blank>
    • Password: <leave blank>
  6. Enter the following information under the MMS section:
  7. Enter the following information under the Personal Hotspot section:
    • APN: pcweb.tmobile.com
    • Username: <leave blank>
    • Password: <leave blank>
  8. Press the Home button to save the APN and exit to the main screen.
  9. Turn the device off and back on.

Manual network selection

The device detects and registers on wireless networks inside T-Mobile’s calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

  1. From the Home screen, tap Settings > Carrier. If the Carrier option does not appear with a T-Mobile SIM card in the device, it may indicate the device was not correctly unlocked or jailbroken.
  2. Slide the Automatic slider to the off position to start scanning for networks.
  3. Select desired carrier.
  4. Press the Home button.

Switch 2G / 4G

  1. From any Home screen, tap Settings > Cellular > Cellular Data Options.
  2. Drag the Enable LTE slider to enable or disable.

Turn on / off airplane mode

Airplane mode turns off wireless connections. This allows app and menu use, but prevents voice or Internet use.

  1. From any screen, slide your finger up from the bottom of the screen.
    • If a small arrow appears, slide your finger up again.
  2. Tap the Airplane Mode icon.

Turn on / off data roaming

Follow these steps to turn off data roaming. If roaming in a Simple Global country with iOS 10, you must turn off mobile data to prevent data usage.

  1. From any Home screen, tap Settings > Cellular > Cellular Data Options.
  2. Drag the Data Roaming slider to OFF.

Turn on / off mobile data

  1. From the main menu, tap Settings > Cellular.
  2. Tap Cellular Data to turn on or off.
Sours: https://www.t-mobile.com/support/devices/apple/apple-ios-10/network-and-apn-apple-iphone-and-ipad-on-ios-10
How to change your APN settings on an iPad with a mobile data sim from O2

Monsters climbed out of the phone, computer, entered the door and even thrust their heads into the windows of the low first floor. He paid, agreed, scolded, threatened. He knew how to do this, and the monsters, grumbling and snarling, or grinning eerie smiles, depicting contentment and friendliness, disappeared into the nothingness that gave rise to.

Similar news:

I saw how for a second a ray of light flashed in the room; it was someone who quickly opened and closed the door to the. Room. At first I thought that someone had mistaken the door, but after a few seconds I saw a dark silhouette, which was watching us, leaning against the.

Jamb of the door, which closed the passage from the room to the small corridor. Frankly, it didn't matter that someone was watching, at that moment I did not consider this a reason to interrupt and expel an unexpected.



1129 1130 1131 1132 1133